[Pianod] Testing on v234

[Bruce M. Sheplan via Pianod]

Just tried out v234

1) selecting device now works properly!

2) startscript creating rooms and setting devices now works

BONUS:
- Can now play 3 streams at once without issues (previously I was limited
to 2 streams at once)

I havent had a chance to test network hangups yet.

- Bruce


On Tue, Aug 16, 2016 at 11:35 PM, Perette Barella <perette at barella.org>
wrote:

> On Sat, Aug 13, 2016 at 10:48 PM, Perette Barella <perette at barella.org>
> wrote:
> With the following testing commands I can make a test tone come out of the
> different outputs:
>
> gst-launch-1.0 audiotestsrc freq=1000 num-buffers=100 ! alsasink
> device='hw:0'
>
> This makes me think the correct command is:
> ROOM RECONFIGURE DEVICE "alsasink device='hw:1ʹ"
>
>
> The single quotes aren’t needed, although gstreamer seems to tolerate them.
>
> I’ve added a lot of error checking/reporting to r234.  That may help, and
> in fact I”m able to output to an alternate device on my Pi2.  But after one
> song, it jams up… so something’s still wrong.  But it only does it with the
> alternate audio output; the default works fine for multiple songs.
>
> I’ve been pressed for time, and I’m going to be away now for a few days.
> I hope to get back to this early next week.
>
> Perette
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.deviousfish.com/pipermail/pianod-deviousfish.com/attachments/20160819/be82b8c5/attachment.htm>