[Pianod] Music doesn't start when launched at startup

[Jimmy Pop]

Issue
Pandora user xxxx at xxx.com MyPassword

Changing the email and password ;)


James Wynhoff
Fuzion3
CA/NV Control4 Platinum Dealer
Web: www.Fuzion3lv.com
Cell: 702-587-4916


On May 7, 2013, at 8:26 AM, "pi.gonewest at xoxy.net" <pi.gonewest at xoxy.net>
wrote:

With version 137.

$ nc 10.0.0.18 4445
200 Connected
100 pianod 137. Welcome!
141 Volume: 0
108 No station selected
103 Stopped
user admin admin
132 admin signed in
200 Success
136 Privileges: admin owner service influence tuner
select station madonna
132 admin selected the station: Madonna
109 SelectedStation: station Madonna
200 Success
play
200 Success
132 admin resumed playback
105 Track playback complete
108 No station selected
103 Stopped
503 Service shutting down

On May 7, 2013, at 8:18 AM, "Jimmy Pop - jimmypopali96 at gmail.com"
<pi.gonewest.8996a436fa.jimmypopali96#gmail.com at ob.0sg.net> wrote:

After it boots, can you connect on 4445 at all? What is the output?
I found this a while ago, but in my pianod init.d I simply made it sleep
for a bit first.




James Wynhoff
Fuzion3
CA/NV Control4 Platinum Dealer
Web: www.Fuzion3lv.com
Cell: 702-587-4916


On May 7, 2013, at 7:17 AM, "pi.gonewest at xoxy.net" <pi.gonewest at xoxy.net>
wrote:

Hi Perette, actually I tried that change last night but it had no effect.
 Pianod continues to start in some inconsistent state, giving me internal
error 500 whenever I ask to play a station.  Stopping and starting the
pianod service always fixes this.

I tried adding an early ao_default_driver_id() test up in main().  In
pseudo code what I added  was something like:

ao_initialize();
x = ao_default_driver_id();
while (x<0) {
  print failure message
  sleep a bit
  x = ao_default_driver_id();
}

On the theory that I could just wait until the default device was
available. But this code didn't make any difference.

I implemented a command "reset audio" with the idea that, if the audio is
in some inconsistent state I could use this command to manually reset, eg
  ao_shutdown();
  ao_initialize();
But this didn't work either.

One thing I cannot figure out is how to redirect stderr and stdio to a file
in that init.d script... A little help on that would be  much appreciated
and probably help everyone involved. Thanks!

On May 7, 2013, at 5:19 AM, "Perette Barella - perette at barella.org" wrote:

Hi guys,

You're right about the ao_default_driver_id.
 if (audioOutDriver < 0) {
 audioOutDriver = ao_default_driver_id();
+ if (audioOutDriver < 0) {
+ BarUiMsg (player->settings, MSG_ERR, "No audio driver available\n");
+ return NULL;
+ }
 }


But if taking the play out of the startscript didn't work for GoneWest,
there must be something more.  Is it dropping a core?  If you ./configure
--enable-debug, it compiles with -g and you should get core dumps suitable
for loading into GDB to find out exactly where it's dying.

Perette


On 2013年05月07日, at 1:00, pi.gonewest at xoxy.net wrote:


Chinasaur and I have been discussing this same issue on the Raspberry Pi
forums. (
http://www.raspberrypi.org/phpBB3/viewtopic.php?f=35&t=37494&p=344130#p344130
)

In my case if I setup pianod to play immediately upon launching it fails,
but if I immediately restart the service without changing anything else
playback works fine.  My thought is the daemon is trying to play before the
audio driver is completely ready.

So I'm going to try two things:

(1) remove the "play" command from my startscript.  Looks to me like pianod
doesn't try opening a playback channel until it needs to play a song, so if
I boot with pianod in an idle state then I can choose how long to wait
before selecting a station.

(2) change the player logic.  BarPlayerOpenAudioOut(). The function calls

 if (audioOutDriver < 0) {
      audioOutDriver = ao_default_driver_id();
}

but according to the libao documentation, ao_default_driver_id() can return
-1 if there is no usable audio output device. There's some logic that
assumes it's possible to fall back to a "default" device but in my case I'm
already using the default.   I want to see if there's some way to detect
this case and fail more gracefully, e.g. pause and retry or something along
those lines.



_______________________________________________
Pianod mailing list
Pianod at lists.deviousfish.com
http://lists.deviousfish.com/listinfo.cgi/pianod-deviousfish.com


_______________________________________________
Pianod mailing list
Pianod at lists.deviousfish.com
http://lists.deviousfish.com/listinfo.cgi/pianod-deviousfish.com

_______________________________________________
Pianod mailing list
Pianod at lists.deviousfish.com
http://lists.deviousfish.com/listinfo.cgi/pianod-deviousfish.com

_______________________________________________
Pianod mailing list
Pianod at lists.deviousfish.com
http://lists.deviousfish.com/listinfo.cgi/pianod-deviousfish.com

_______________________________________________
Pianod mailing list
Pianod at lists.deviousfish.com
http://lists.deviousfish.com/listinfo.cgi/pianod-deviousfish.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.deviousfish.com/pipermail/pianod-deviousfish.com/attachments/20130507/1a9bfcc7/attachment-0003.htm>